|
Faults |
Failure Cause |
Solutions | ||
| Motor | No rotation | Forward or reverse rotation by hand
| Switch or circuitry is poor connection | Making the right connections or overhaul |
| Fuse is not connected or single wire | Maintenance or change it | |||
| Power abnormal | Improve the power supply facilities | |||
| Unable to rotate by hand | Motor is damage | Maintenance or change the motor | ||
| Bearing is damage | Change the bearing | |||
| Motor is damage | Maintenance or change the motor | |||
| Rotation | Reverse rotation | Connection error | Check the connector | |
| Overheat | Over-load | Adjust the exhaust pressure | ||
| Power abnormal | Improve the power supply facilities | |||
| Temperature in motor room is exceed to 40°C | Increase the ventilation | |||
| Rotation speed is too low | Power abnormal | Improve the power supply facilities | ||
| Over-load | Adjust the exhaust pressure | |||
For more information or enquiry, please contact Environmech Sdn. Bhd.
Contact us: http://www.environmech.com/p/contact-us.html
Website: www.Environmech.com
