Auto Strainer Malaysia Supplier - Environmech Sdn Bhd

Supply Ability:
20 Unit/Units per Week
Port: Port Klang Malaysia
Place of Origin: China (Mainland)
Brand Name: ENMECH
Model Number:
Product name: Auto Strainer
Color: Typical Red, Blue, Silver
Application: Filtration of water and wastewater
Type: Stainless Steel
Size: Diameter 50 to 250 mm

Enmech Automatic self-cleaning water fitler is suitable for industrial waste water treatment process, steel mill slag washing water, power plant procedure and cooling water, paper making procedure and water input, chemical manufacturing and irrigation system and so on. It can be used to filter all kinds of hard particles with grain diameter from 50um-1000um,thus ensuring the system normal operation.

Working principle

  • Water flows into strainer through inlet, the impurity particles were intercepted inside the strainer then the filtered water flows out through water outlet .
  • The pressure differential will generate once the dirt accumulated on the inwall of fine filter. When the pressure difference reach to the pre-set value, the controller will send out indicating signal of opening blowoff valve and starting scanner, sucking nozzle.
  • Then the system start decompressing &blow off dirts, a stream of strong backwash water generated and flow towards atmosphere through blowoff valve. It generates suctions inside sucking nozzle.
  • The impurity particles which adsorbed in the inwall of microfine screen flow into sucking nozzles along with flow and outfall through blowoff valve. The scanner keeps rotary and axial moving simultaneously to insure the cleanliness of strainer.
  • It'll take 8s~25s for one self-cleaning cycle without interruption of water flow and the loss of water is few. Once self-cleaning process finished, the valve closed and the scanner moved back automatically .
  • The next self-cleaning cycle will start according to the system programming and repeat the above steps.

Manufacturing Material

  • Filter Body: Carbon Steel,Zinch-rich primer,Epoxy Layer/ Stainless Steel
  • Mesh: Stainless steel punching hole meshes
  • Cleaning Device: Stainless steel/ Nylon
  • Down Valve: Cast iron/
  • Seal: PU

Main Features

  • Corrosion prevention character:carbonsteel ,zinchrichprimer, epoxycoating ;
  • Low pressure loss:larger filtering area screen alow slow pressure loss;
  • High filtration precision: up to 50 um filtration precision, variety of screens available for your option
  • Uninterrupted water supply:it takes only 30s for self - cleaning process.
  • Few water consumption and no effect on system water flow.
  • Automatic Self CleaningFunction : Intellegent control system to feed back the dirty deposited state of filter, It can automatic self cleaning once the state reaches to pre - set value.
  • Diversified Control Mode: Pressure Difference Control, time control, manual control, PLC control to implement cleaning. Providing early warning signal.
  • Product spec:different DN available for each model, single unit to handle normal working condition, multi machine parallel connect alows to handle large water flow, large filtering area working condition.
  • Widely application field:industrial water,wastewater treatmen,recycling cooling water and so on.

Technical Specification:
Rated operated voltage: 3 phase / AC V,50HZ, single p 400 hases AC240V/50HZ and other