Diffuser data
xx) Recommended measure from basin bottom to diffuser top.
xxx) Model KKI 215D D90 is suited for deeper basins. Consult ABS on depths outside the range.
| Design air flow range | 0,5 -4,0 m³/h/diffuser (x (+20°C ; 1013 mbar) |
| Diffuser level | 250mm (xx |
| Air temperature, max | + 80°C |
| Max/min assembly depth | 3 – 8 m (optimal) (xxx |
| Diffuser diameter | 215 mm |
| Disc surface area | 0,025 m2 |
| Size of bubbles | 1 – 3 mm |
| Diffuser weight | 0,770 kg |
| Max/min interval, c/c | 1,0 / 0,35 m |
x) When waste water contains chemicals harmful to EPDM or when water temperature is
>30°C or air temperature is close to 80°C, a lower maximum air flow should be used.
>30°C or air temperature is close to 80°C, a lower maximum air flow should be used.
A peak value of 5 m3/h can be used for max. of 15 min only e.g. for cleaning the membrane.
xx) Recommended measure from basin bottom to diffuser top.
xxx) Model KKI 215D D90 is suited for deeper basins. Consult ABS on depths outside the range.
For more information or enquiry, please contact Environmech Sdn. Bhd.
Contact us: http://www.environmech.com/p/contact-us.html
Contact us: http://www.environmech.com/p/contact-us.html
Website: www.Environmech.com
