Solenoid Removal & Installation (Figure 5)
The solenoid controls hydraulically the flushing valve's operation.
A、Solenoid Valve Classification
According to the electric power type classification ：DC、AC
Classified by material ：PVC、Brass
According to the classification of the initial state：（NO）、（NC）
According to the classification of the initial state：Big flow rate – PVC；1.2、1.6、2.4
– Brass
NOTE：When the work pressure is very high (more than 10 bar), please use
electromagnetic valve of small flow capacity - 1.2 brass of the solenoid valve
Solenoid valve manual control method.
electromagnetic valve of small flow capacity - 1.2 brass of the solenoid valve
Solenoid valve manual control method.
The control method of PVC Solenoid valve: As shown in figure (a)，with the hand will
be located in the central solenoid valve wrench 90 °clockwise，it will change the
Solenoid valve water inlet and outlet and the working state of the port to control drain
valve open and close，and then to reverse the cleaning filter by hand.
The control method of Brass Solenoid valve：As shown in figure (b)，use a flat blade
screwdriver Rotate the screws which on the upper of Brass base back 90 degrees
clockwise，it will control the flushing valve open and close by change the Solenoid
valve inlet and outlet.，and then to reverse the cleaning filter by hand.
For more information or enquiry, please contact Environmech Sdn. Bhd.
Contact us: http://www.environmech.com/p/contact-us.html
