Cautions for Installation for Electromagnetic Flow Meter (Semenyih)

*Avoid Air Bubbles.
If air bubbles enter a measurement pipe, flow rate indications may be affected and measurement errors may be caused.

* Install the meter with enough room  for future access for maintenance purposes.

* The magnetic meter isolating liner, whether it is PTFE or Rubber, is not intended to be used as gasket material. Standard gaskets (not provided) should be installed to ensure a proper hydraulic seal. When installing the gaskets, make sure they are properly centered to avoid flow restriction or turbulence. Do not sure graphite or any electrically conductive sealing compound to hold the gaskets in place during installation. This could affect the reading accuracy of the measuring signal.

WARNING : Precaution for direct sunshine and rain when the meter is installed outside.

                                                           Page 1 of 2

For more information or enquiry, please contact Environmech Sdn. Bhd.

Contact us: